Cure & Seal
For detailed safety sheets and in-depth information about sealers, visit www.russtechnet.com
Cure & Seal #150
Designed to provide a clear curing film to promote proper cure and hardening of new concrete and to enhance all concrete surfaces, both new and existing, by developing an abrasion resistant, glossy film.
Cure & Seal #250
Contains 25% solids and can be sprayed easily through an ordinary sprayer. Available in gallon containers.
Cure & Seal #300 (Brown)
A ready-to-use acrylic, copolymer designed to cure concrete and provide a durable protective coating for both interior and exterior concrete surfaces. Can be power sprayed, has excellent resistance to yellowing, and forms a tough impervious bond to concrete which resists fresh cement alkalis, salts, most stains and dirt penetration. Abrasion resistant glossy film protects terrazo floors, concrete tiles, and exposed panels against discoloration caused by efflorescence, dust, air pollutants and spillage of mild chemicals and mild petroleum products.
Creteseal #30 Light Brown
A clear sealer that contains a unique resin and solvent formulation designed to provide maximum penetration into the concrete. Makes colors brighter, surfaces more glossy and reduces fading, while creating a hard and long-lasting barrier. A non-styrenated, pure acrylic, it is non-yellowing and highly resistant to oil, grease, acid, de-icing salts, UV rays, wet and dry abrasion and most household chemicals. Specifically formulated for stamped and decorative concrete but will work for all concrete applications and surfaces.
Stampseal #30
A clear sealer that contains unique resins and solvent formulations designed to provide maximum penetration into the concrete, it makes colors brighter, surfaces more glossy and reduces fading (resulting from weather exposure) of decorative concrete surfaces while creating a hard and long lasting protective barrier over the concrete surface.
Silicaseal
A proprietary polymerized solids in a water- based V.O.C. compliant system, ready-to-use liquid that reacts with the free lime in concrete to form an insoluble crystal within the concrete pores to help repel water, de-icing salts and to seal, harden and dustproof concrete surfaces.
Surface Retarder
A concrete surface retarder designed to retard the initial set time of surface mortar to expose aggregate surfaces.
EVERT
Creates a monomolecular film retarding the moisture loss from the concrete surface, allowing time for proper finishing and help in preventing plastic shrinkage of the concrete slab.
Cure & Seal #300 (Clear)
Designed to provide a clear curing film to promote proper cure and hardening of new concrete and to enhance all concrete surfaces, both new and existing, by developing an abrasion resistant, glossy film. When applied to architectural panels as a sealer prevents premature weathering and enhances the beauty of exposed aggregate. Cure & Seal 300 protects terrazzo floors, concrete tiles, colored concrete and exposed panels against discoloration caused by efflorescence, dust, air pollutants and spillage of mild chemicals and petroleum products. A two coat application on exterior surfaces will minimize the possibility of scaling.
Concrete Products
Buckeye UltraFiber 500
For superior, no-blemish finishing with improved hydration, better bonding with cement and excellent crack reduction. For more information and safety sheets, visit www.durafiber.com.
Foam Expansion Joints
Available in 50-foot rools. Used in control joints and butting concrete against an existing surface.
Rubber Expansion Joints
Available in 10-foot sections. Used in control joints and butting concrete against an existing surface.
#4 Rebar: 1/2"
Pre-cut in 5-foot, 10-foot, or 20-foot pieces. For custom lengths, please call order in a day in advance.
Wire Mesh
5 Ft. x 150 Ft. rolls available for pick-up only; no delivery. Used as reinforcement in slabs.
Concrete Finishing Shoes
FINISHING SLICKS™ Brand Concrete Finishing Overshoes are designed to be worn during the actual finishing phase of concrete. Made from a patent-pending design which allows the concrete worker to leave minimum foot impressions on concrete, prevents mud and debris from depositing from work shoe to concrete slab, and will not adhere to most concrete surfaces regardless of aggregate or additives. Comes in a universal size to fit any shoe, left or right.
Plastiform
This concrete flatwork forming system is a "green" technology that saves you green as well. No more cutting down trees and no more throwing money away by throwing out wood. Plastiform™ flatwork forms are reusable for years, can accommodate straight or radius work easily, and are lightweight – only about 1/3 the weight of wood. With Plastiform™, there's no nailing, which makes for fast setup and quick and easy stripping; plus cleaning is a breeze, because silicon in the boards with normal form oil inhibits concrete adhesion. The concrete just falls off. More information
Please call 502-955-6962 for pricing and availability.